ACCESSORIES
|
|
Check out our
NEW high tech Universal Antenna!!
This 12 volt antenna is very easy to install
and requires no mounting holes. You can install it inside your
trailer to prevent weathering or theft. It has separate AM and
FM amplifiers for maximum performance. The ground wire
eliminates noise and it has a red LED to confirm amplifier
operation. It's reception is equal to factory 31" external
antenna in most applications.
THESE REALLY WORK!!!! |
|
Mast: 14 1/2"/37 cm
Cable: 93"/236 cm
ELE4509-06 $21 each |
|
Cut
out size is 12" tall X 18" wide |
Windows
Crank open from the
bottom. Hinged at the top and come with screens. |

22 3/4" Wide
X 18" High
X 4" Deep
1 1/4 inlet protrudes 2" |
7.5 gal. Water
Tank
Polypropylene water tank, 7.5 gallons replaces
original Kenskill tank.1 1/4" inlet, 1/2" threaded outlet. Perfect
replacement for any teardrop! |
|
ACC-1002-01 $61.50 each. |
KEN-SKILL REPO $67.00 each. |
|
 |
110 VAC Outlet
w/Dust Resistant Cover
Attaches from the outside of the trailer so you
can add 110V or keep your battery charged without opening the
galley lid to plug it in. |

Click here for a
printable flyer |
Lite Flare
Really cool
LED battery powered replacement for those messy flares. Two
"AA" batteries will last for up to 400 hours. Visible at
night for up to 1 mile. Tough enough to be run over by a truck and
not break. |
ELE4503-02 Inlet $28.50 each ELE4503A-02 Connector $9.99 each
|
$15.00 each |
|
 |
Trailer Data Decals
Ken-Skill, KIT & a Generic to give your home-built an original
look.
This is a water transfer decal with a place for the trailer serial
number to be applied. They were put on the inside top left corner of
the right hand door on the original trailers. |
 |
KIT Logo
Decal
All vinyl, brown KIT logo. The finishing touch
that will set your trailer apart from the rest.
|
|
KenSkillACC1005-01 $8.00 each KIT
ACC1007-01 $8.00 each Generic
ACC1008-02 $8.00 each |
ACC1006-01 $22.00 pair |
|
Reproduction vin
plates for Kit & Kenskill
Stamped with your numbers; additional $4.95 |
 |
Full Color Ken-Skill Logo Decal.
An exact copy of the original. These
have been done in vinyl for easy application and longevity.
|
|
ACC1022A-02 $19.95 |
ACC1004-01 $40.00 pair |
|
 |
Billet
Aluminum Base Clearance Light
We have these made and think they are a great improvement over
the flimsy base that comes originally with this style light |
 |
Twin Dome Light
A toggle switch on the side allows you to
switch between either a white halogen light or a red halogen light. Red
light will not attract bugs or blind you . Polished stainless steel
bezel and glass lenses. |
|
LEX7013 Amber $25.95 each LEX7014 Red $25.95 each |
LIN-8003-01- 4 1/2" diameter
$19.50 LIN-8001-01- 5 1/2" dia. NAV SS Dome light, w/toggle $34.50 LIN-8004-01-7" dia. $29.50 each LIN-8005-01- 7" dia.
NAV SS with dimmer $43.00 |
|
 |
Side Marker Lights
Available in amber only. Comes with a chrome bezel.
Closest reproduction of Ken-Skill marker lights. |
 |
Adjustable Galley Light
We've got the reproduction for you! This is the best and most
original looking reproduction on the market. Don't settle for
anything less than the exact replacement type galley light. |
|
LEX7007-01 Amber 22.00 each |
LIN8007-01 $47.00 each |
|
 |
Stainless Steel Tail Light
Original styling in this light will blend well into any
restoration project. Can be wired to act as turn signal as well.
|
 |
Black Taillight Bracket
Taillight bracket that has been powder coated
for durability. This is specifically curved for the left hand
mounting but both sides are available. This bracket mounts to a flat
surface. |
|
LEX7001 w/o license light $45.00 each
LEX7002 w/license light $45.00 each |
LEX7004 left hand
$45.11each LEX7005 right hand $45.11 each
|
|
 |
Chrome
Taillight Bracket
Fender mounted, works best on KenSkill and Modernaire fenders. Good
looking and high quality. |
 |
License Plate bracket
License plate bracket which is stamped from a
high grade zinc plated steel for rust resistance. This is the
correct bracket for center mounted plates which were mounted to the
galley lid of most trailers.
|
|
LEX-7009-01 $49.50 each |
BRKT1201-01 $6.95 each |
|
PHOTO |
Door Bumper Catch
Hinged bumper catch, 3" assembled. STOPS your
cabin doors from swinging closed and hold them open. OEM part
|
 |
Trailer
Trash Doll
Perfect for the collector that does
not have everything. Coming soon we will have a new Trailer Trash Doll.
|
|
HDW6017-01
$7.95each |
Trailer Trash Doll $21.95
|
|
 |
Original License Plate Tabs
Metal License plate tabs straight out of the 40's and 50's. This is
originality at its finest! |
|
Stainless Steel Table Brackets
Removable table brackets for exterior mounted tables. Stainless
steel and sold in 4 piece sets. Fits flat against the side of your
trailer. |
LPTCal46 1946 $45.00
each LPTCal47 1947 $45.00 each LPTCal48 1948 $45.00 each LPTCal49 1949 $45.00 each LPTCal50 1950 $45.00 each
|
HDW6027-01 $21.74 set
HDW6027-01 $21.74 set (4 pcs.)
Table Bracket: 2-1/8"x 3-3/8"
Wall Bracket: 1-3/4 x 2-3/4" |
|
 |
Fridge
Mate
Battery powered by 2 "D" cell batteries.
Will run for 30 days continuous. Works great to eliminate
"warm" spots in your ice box. |
 |
On-Board
Battery Charger / Maintainer
Compact size makes it
a perfect accessory for your teardrop trailer. |
|
APP-3015-03 $19.95
each |
COMING SOON! |
|
Photo |
Ventilator
Each hinge less ventilator is an independent unit and may be
opened to any desired degree in either direction for complete
control of air flow. With all these opening options it still remains
water tight when it is closed! This vent is the correct size for
your teardrop trailer |
 |
Attachable
Trailer Tent Walk into the front door and go directly
to the opening in the back where your teardrop door is surrounded by
a sock. You do not need to drill any holes. Great if you need to
change clothes or have the kids along. The tent comes with a floor,
screen windows and a rain fly. One color, beige and green. |
|
ACC1009-01 $49.95
each |
ACC1008 $299.95 each |
|
 |
Swivel
Nose Wheel
Our custom made trailer nose wheels swivels 360° with a maximum load
capacity of 300 lbs. These little inflatable tires make it easy to
push your teardrop around in the mud, sand or snow. It's so easy my
90 year old grandmother can get her teardrop out of the Grand Canyon with one hand
tied behind her with no shoes on, in the middle of summer, wearing her
bikini, carrying her bull dog on her back (named Pooopsi) who weighs
120lbs and has a kidney problem! |
 |
New Old Stock California Trailer
License
Plates
These are amazing! California License plates (New, un-issued and in
original envelopes). These plates are cleared by DMV and are ready
to be re-issued as the year of manufacture plates,YOM, for
your teardrop trailer restoration this is a must have item. The availability is very, very limited so
please call. When they are gone, they are gone. |
|
TRS1103-02 $81.00each |
PLT2003-01 $225.00 was $245.00 |
|
Original License Plate Toppers
If you loved those old slogans and emblems that used to adorn
the license plate frames of the 50's, look no further; call us to
see if we've got just the one for you!
|
DOOR T-Moulding Seal
T moulding seal. 3/16' thick X 3/8' wide X 17' long, for
around the doors |
|
LPTT various $150.00 each |
WTS1101-02 $4.75 |