TRIMS & MOULDINGS
|
Mouldings
are a Shop specialty.
We own the molds so you get the softest aluminum possible.
|
 |
Galley
lid hinge
Made from our own extrusion
Reproduction of original type deck lid hinge. Water
tight. Includes instructions.
Our 5' Hinge has
been REDUCED in price! |
 Our aluminum drive screws give a riveted
and finished look.
HDW6022-01 |
Top edge moulding
Made from our own extrusion, this is the
moulding that connects the exterior top and exterior sides of the
trailer and provides a water tight seal. It can be used over a wide range of
products (wood, Filon and many more). Most commonly used with aluminum
exterior siding.
1/2" X 1" X
8'
|
HDW6003-01 $39.95 per 4' hinge
HDW6003-01A $49.50 per 5' hinge |
ALT 2001A-01 $15.95 per 8' length.
ALT2001B-01 $10.00 per 5' length (specific for galley lid) 16'
Available (shipped by truck) |
 |
Door Trim Edging
This shape is primarily used on the inside door frames.
1/2" X
1/4" X 8' |
 |
"T" Door Moulding
The absolute finest "T" shaped moulding which was used
around the door on original
teardrop trailers. This is the softest and closet to the original
available. Extruded from our own molds!
Don't' forget
weather-stripping!
WTS1103-02
3/4" X 1/2"
X 8'
|
|
ALT2003-01 $11.65
per 8' piece |
ALT2006-01 $23.00 per 8' piece |
|
Drip Rail Mouldings
Every moulding we carry is made with the finest grade aluminum
available. We use the softest and strongest materials available to make
forming this moulding to your trailer as easy as it gets.
13/16 X 4'
|
 |
Double Edge Trim
This moulding was specifically used on the bottom of the
galley lid and lower side trim of the Ken-Skill trailers. This trim is sold
in
13/16" X 8'
|
|
ALT2007-01 $11.95
per 4' piece
8' lengths available upon request |
ALT2004-01 $15.93 per 8' piece
|
 |
Kitchen Cove Mouldings
KIT counter tops all came with a contoured moulding. This
decorative moulding was both attractive and functional and applies with ease
. We use this to finish all of our trailer galleys.
1/2' X 1/8" X 8'
|
|
Reproduction Rivet Sets
Not just a look-alike! These are the very same rivets
used to hold the galley edge moulding in place. 30pc.
|
|
ALT2008-01 $16.67
per 8' piece |
HDW6023-01$10.00 per package |
 |
ALUMINUM DRIVE
SCREWS
Our aluminum drive screws give a riveted and
finished look. |
|
HDW6022-01 $10.00 per 100 ct. |
|
Double Edge Trim Rivet set
Attaches double edge trim molding to the bottom
of Galley lid (Qty 30) |
Rivet set for Galley Lid,
Attaches the Top corner edge trim to the galley lid
sides. (Qty 30) |
|
HDW6023-01 $10.00 |
RVT6023-02 $10.00 |
|
Long rivet for galley lid
This rivet goes through the skin, hinge and the molding.
One on each side at the top of the galley lid, (Qty2) |
DOOR T-Moulding Seal
T moulding seal. 3/16' thick X 3/8' wide X 17'
long, for around the doors |
|
HDW6023-01-RVT6032-02A1 $1.22 |
WTS1101-02 $4.75 |
|
WEATHER STRIP
Door hinge seal, foam 1/4in thick 1/2in wide
17ft long - |
|
|
WTS1104-02 $4.31 |
|
