Frames, Axles & Hubs
|
|
Our trailer frames are jig built and welded to
the original designers' specifications; some modifications have been made
for safety only. |
|
(wheels & tires sold separately)
|
"KenSkill" Frame complete
Bill Kennedy
provided original plans and drawings.
Ground clearance and proper tongue
weight have
already been determined by the original design.
You can also
build your own home built trailer
on this frame, up to 10' long and
still
retain original fenders.
|
|
KS Frame $1,500.00 each |
| Photo not currently available,
please check back. "KIT" Frame complete.
Using the original "Kit" trailer manufactures frame as a
pattern, we have reproduced this unique frame right down to the original
vehicle identification plate. With modern independent stub axles that
receive late model VW four lug 15' wheels, we have been able to retain the
original ride height and proper clearance. Wheels and tires sold separately. |
Home built
Trailers
If you are building
your own trailer, our trailer frame components
will work in most
applications.
Both 4' X 8' and 4' X 10' trailers can be built using our frames.
Check with us for your specific needs.
|
|
KIT frame complete $1,500.00 |
-
All parts for our axles can be ordered separately.
-
These
axles can be used on any frame if the trailer rails are set to the proper
width.
-
If proper ride height and the use of original fenders is important to
you, then you need to investigate our axles.
You don't need a 2000 lb. axle for a 800 lb. trailer!
Shipping not included |
|
"KenSkill" Axle Only
Your search for an axle that works is over.
Our axles are specifically designed with quality and accuracy in mind.
Our design follows the original. They can be used as a replacement.
By using this axle you can use the original wheels, tires and fenders.
|
|
KSAXL-Axle Only $285.00
each |
|
"KenSkill" Axle Complete
That's right, a complete axle with all the parts you need to weld
everything right to the bottom of a trailer frame (preferably ours). The
right springs, hanger kit, hubs, u-bolts and bottom plates Some welding required. Our axle keeps
the wheels in close so you can use original fenders.
Original ride height is retained. Will work with home
built trailers too! |
|
KSAXL-Complete $395.00
each |
 |
"KIT" Independent Replacement Axle
This axle replaces any worn out or broken axle on "KIT" trailers.
The trailing arm is at the same degree as the original. Fender clearance
is not a problem. This
axle
can also be used for new construction. |
KTAXL (NEW) Axle only $150 per set
With Hubs and bearings $300 complete |
|
"KenSkill" Original Axle Repair Kit
Don't throw away those original "KenSkill" axles. You know, the ones
with the over and under compression springs made by Superior Spring Axle
Company.
We have replacement
springs. |
|
AXL $228
per set |
|
"KenSkill" Springs
1,200 lb (per pair)
4 Leaf One of the most important parts of your trailer.
If your ride is too hard you will shake your trailer cab right off the
frame. Lets get the right compression for your trailer so the thing will
track straight and not bounce all over the road. Our springs do just that. |
|
KSAXL-P3 Springs $25.71 each |
|
 |
Hubs
6 on 5 1/2" bolt pattern.
Includes: inner & outer bearings, bearing races, grease seal,
grease cup, idler cup, wheel nut.
Use with 15" or 16" Chevy wheels.
Inquire if you need a different bolt pattern. |
|
KSAXL-P2 Hubs
$75.00 each |
|
 |
Hubs
4 on 5 1/2" bolt pattern. Includes: inner & outer
bearings, bearing races, grease seal, grease cup, idler cup, wheel nut, Use
with 15" late model VW wheels. Inquire if you need a different bolt pattern
|
|
KTAXL P-7 Hubs
$75.00 each |
